Bluetooth Mesh · Thread · LoRaWAN · Zigbee 3.0
Wireless mesh networking built for real facilities
Deploy 500+ nodes across office towers, campuses, and hospitals — with BACnet/IP, Modbus TCP, and DALI-2 integration out of the box.
Core Capabilities
Protocol-native, not protocol-agnostic
Most mesh platforms paper over protocol differences. Meshkindle exposes the full stack — and gives facility engineers the controls to match protocol to deployment context. We are not a BMS replacement: we sit alongside Niagara, Desigo, and Metasys via BACnet/IP, adding wireless sensor data to the building systems you already run.
Multi-protocol mesh
BT 5.x Mesh for lighting and low-power assets. Thread / 6LoWPAN for HVAC control loops. LoRaWAN for outdoor and long-range sensors. Each protocol running in parallel, managed from one gateway.
Edge-secure architecture
Every MK-GW gateway ships with TPM 2.0 and mutual TLS provisioning. OTA firmware updates are signed and verified before applying. Node credentials never leave the facility perimeter.
BMS-native integration
BACnet/IP and Modbus TCP adapters are built-in, not added on. Connect mesh sensor data directly to Johnson Controls, Siemens Desigo, or Honeywell Niagara — without a middleware server.
Solutions
From lighting to chillers — one mesh
Deploy a single mesh layer that serves every building system, from DALI-2 luminaires to chiller vibration monitors.
MeshOS Platform
MeshOS: the firmware and dashboard behind every deployment
Device provisioning at scale, OTA updates with rollback, MQTT-SN data pipelines to your BMS, and a live mesh-health dashboard for facility teams.
See Platform Specs
Integrations
Integrates with the systems you already operate
Deployment Profiles
Deployed in facilities managing 1M+ sq ft
Meshkindle does not publish client names (facility contracts are confidential). We publish deployment profiles instead.
24-floor Class A office, 1,200 BT Mesh nodes, DALI-2 lighting + occupancy sensing
8-building campus, Thread + LoRaWAN mesh, HVAC zone control for 400 rooms
3-site deployment, Zigbee 3.0 asset tracking + environmental monitoring
From the field
What facility engineers say
"We evaluated five mesh platforms before Meshkindle. Every other vendor required a separate integration server between the gateway and Metasys. Meshkindle's native BACnet/IP adapter meant our BMS engineer could map the points directly — no middleware, no custom driver license. Commissioning time dropped by roughly four months."
"The Thread stack on the MK-GW-1000 holds RSSI margins in the basement chiller room — through a 250mm concrete slab, next to high-voltage switchgear. The two other platforms we piloted both degraded to packet loss above 20% within six weeks of commissioning. Meshkindle has been at 99.8% uptime for 18 months."
Start with a site survey — not a contract
We visit your facility, map the RF environment, and design the mesh topology before any hardware ships. Pilot deployments typically start at 50–100 nodes.